The protection of fiber laser cutting machines is particularly important under high temperature and rainy weather conditions. Because these extreme weather conditions may have a serious impact on the performance and life of the machine. Here are some strategies on how to protect your laser cutter during this harsh weather.
1. Indoor placement of the machine
First, make sure the fiber laser machine is placed in an indoor environment that can shield it from rain. Although this sounds like basic common sense, it is very necessary to carefully inspect the factory building for leaks or excessive moisture problems before a heavy rain hits. In addition, the computer room needs to have good moisture-proof measures. For example, use moisture-proof mats or sealing strips to enhance the sealing of doors and windows to prevent moisture and rainwater from entering.
2. Temperature and humidity control
High temperature and high humidity are two major factors that affect the performance of laser cutting machines. An air conditioner or dehumidifier should be installed to control the temperature and humidity in the computer room. The ideal ambient temperature should be maintained at 22 to 24 degrees Celsius. And the relative humidity should be controlled below 70%. This helps prevent machine parts from overheating due to high temperatures, or rusting due to high humidity. Thus maintaining the accuracy and longevity of the laser cutting machine.
3. Power protection
The power system of the laser cutting machine is particularly vulnerable to damage during heavy rain. Make sure all power lines are well waterproofed and moisture-proof, and use high-quality power protectors to prevent damage caused by sudden power outages or voltage fluctuations. In addition, the preparation of backup generators is also necessary. This ensure that basic operations can still be maintained in the event of a power outage and the production schedule will not be affected.
4. Regular maintenance and inspection
It is very important to conduct a comprehensive inspection and maintenance of the laser cutting machine before the arrival of high temperatures and heavy rain. This includes cleaning the machine’s optics, checking electrical systems, lubricating moving parts, and more. Ensuring that all components are in top condition reduces potential damage to your machine from severe weather.
5. Use a protective cover
For laser cutting machines that inevitably need to work in close to outdoor environments, professional protective covers should be considered. These guards not only prevent rainwater from coming into direct contact with the machine, but also dust and other possible contaminants. Make sure the protective cover is sufficiently breathable to avoid overheating while the machine is running.
6. Staff training
In addition to protective measures for the equipment itself, operators also need to be properly trained so that they understand the precautions for operating laser cutting machines in extreme weather conditions. This includes teaching them how to shut down machines quickly and safely in an emergency and how to identify and deal with common mechanical failures caused by severe weather.
Final Thoughts
Through the implementation of the above measures, the laser cutting machine can be effectively protected from the effects of high temperature and heavy rain, ensuring production efficiency and equipment safety. In changing climate conditions, it is always easier to take preventive measures than to address the consequences.